The angular drilling head series W04 offer the possibility to develop an angular drilling head that comes up to your specific requirement.
You may put forward the number of spindles as well as the spindle distance. Furthermore, an additional drilling receptacle can be installed on the opposite side per each spindle. From this results a maximum equipment of up to 10 drilling receptacles. As far as the spindle distances are concerned, you may select a minimum distance of 21,5mm. The dimension A indicated in the drawing varies depending on the selected spindle distance and will be transmitted to you with our confirmation of order.
The angular drilling head series W04 can be equipped with up to 5 drilling spindles on two opposite sides. The spindle turning direction of the medium drilling spindle is equal to the drive turning direction, the spindle turning direction of the other spindles is opposite to it. The optional drilling receptacles on the opposite side have the contrary turning direction.
The type denomination W04-4.8-B indicated in this catalogue stands for an angular drilling head equipped with 2 x 4 drilling receptacles.
The Item Id. EP-030400 does not specify the exact placement of the angular head. It will be necessary in case of an order to - in addition to the order no. - indicate the variable information such as spindle distance and equipment. Corresponding to your order, we will provide in our order confirmation a final order no. for the angular drilling head you ordered. This Item Id. then applies for the specific configuration and can be used in case of further orders for this angular head without any further information.