Tracing spindles FU7-1.1-S
The Tracing spindle series FU7 are used for scanning the lower side of the workpiece and makes a milling cut parallel to it. They have a spindle with a tool receptacle for saw blades or disc cutters. There are also other possible tool receptacles.
The drive speed is transferred 1:1 by a belt drive to the tool receptacle. The maximum spindle speed is 12,000 1/min in interval operation. The tracing bell has an outer diameter of 120 mm and allows a maximum tool diameter of 100 mm. The tracing stroke is 5 mm.
The Underfloor tracing spindle FU7-1.1-S is always supplied together with a drive adapter according to your indications. It is necessary to indicate - in case of an order - the information regarding the drive adapter in question in addition to the article-number. Usually it is a machine specific adapter that is built corresponding to your machine.
Corresponding to your order you will receive within our order confirmation a final article-number. That was extended by the information referring to the adapter you ordered. This article-number. then applies for this specific configuration and can be used for all further orders without any additional information.
Variants on demand!