The angular sawing head series W01 have one machining spindle. The receptacle is a sawing- or nut milling receptacle. The spindle turning direction of the receptacle is opposite to the drive turning direction. The drive speed is transmitted in a ratio of 1:1,55 to the tool receptacles. A maximum spindle speed of 10,000 1/min in interval operation is possible.
With the angular sawing heads of the series W01 the use of saw blades is possible up to a maximum diameter of 300 mm. The freewheeling of the saw blade, however, has to be observed respectively the max. diameter has to be limited correspondingly - both depending on the used drive adapters and the drive cover contour (customer’s part).
Variants on demand!