Fräseinheiten F100A-P
SKU: 042155
The milling spindles of the series F100 are units with pneumatic feed. These units are suitable for working with wood and plastic, light metal and steel. For the processing of light metal and steel they are supplied with a hydraulic damping. The necessary holes are available in standard units, so that an addition of the damping can also be done later.
To allow the use under various spatial conditions, the units can be equipped with different types of drives.
By using a static frequency converter (not included), the drive speed of the F100 can continuously be increased up to 5,600 1/min.
Variants
| Motor kW | Motor speed 1/min | Spindle speed 1/min | Item Id. 75 stroke | Item Id. 100 stroke |
| 1,7 | 2.8 | 12.133 | 42100 | 42150 |
| 1,7 | 2.8 | 8.4 | 42101 | 42151 |
| 1,7 | 2.8 | 5.6 | 42102 | 42152 |
| 1,7 | 2.8 | 4.5 | 42103 | 42153 |
| 1,7 | 2.8 | 2.8 | 42104 | 42154 |
| 2,2 | 2.8 | 12.133 | 42105 | 42155 |
| 2,2 | 2.8 | 8.4 | 42106 | 42156 |
| 2,2 | 2.8 | 5.6 | 42107 | 42157 |
| 2,2 | 2.8 | 4.5 | 42108 | 42158 |
| 2,2 | 2.8 | 2.8 | 42109 | 42159 |
More variants on demand!
Tabs
